TI AUTOMOTIVE · P0 PART DIRECTORY
Browse 62 P0 parts across seven automotive domains. Each entry gives AEC-Q100 grade, temperature, OPNs, package and lifecycle before you open the decision page.
FILTER
10/12-bit parallel-camera FPD-Link III serializer
Converts a pixel-clocked parallel image bus into a single-cable FPD-Link III connection for cameras retaining parallel-output sensors. It has no MIPI CSI-2 input. The PCLK ceiling differs between 10-bit and 12-bit modes, so increasing pixel depth requires a frame-rate review rather than just a register change.
CSI-2-input FPD-Link III sensor serializer
Carries a camera's CSI-2 stream over FPD-Link III while returning control and synchronization over the back channel. Lane configuration is the key input constraint: four-lane operation reduces the per-lane ceiling to 632Mbps, so the two-lane 832Mbps limit cannot be multiplied by four. Serial-link clocking and image overhead need separate budgets.
Dual FPD-Link III deserializer with CSI-2 replication
Receives up to two FPD-Link III sensor streams and multiplexes them onto CSI-2, with replication for simultaneous capture and processing. The 2×2-lane mode duplicates the same video stream rather than creating two independently routable output ports; replication does not preserve a four-lane interface at each destination.
2-MP FPD-Link III serializer
2-MP FPD-Link III serializer for automotive applications such as Front / surround-view camera. Qualification, OPNs and official sources are consolidated below for a fast project decision.
Dual 2-MP FPD-Link III deserializer
Dual 2-MP FPD-Link III deserializer for automotive applications such as Front / surround-view camera. Qualification, OPNs and official sources are consolidated below for a fast project decision.
Quad FPD-Link III camera deserializer hub
Aggregates four independent sensor links into two MIPI CSI-2 outputs for multicamera capture. Summed input signaling rates are not usable CSI image throughput; budget pixel format, frame rate, output lanes and processor capture capability.
Quad camera deserializer hub with one CSI-2 output
Terminates four independent remote-sensor FPD-Link III links and merges them into one CSI-2 output port. This suits aggregation into a single host camera interface, not the dual-output architecture of DS90UB960-Q1. Aggregate image traffic, forwarding timing and the host's virtual-channel handling must be matched together.
Jacinto octal-core Cortex-A72 vision SoC
Jacinto octal-core Cortex-A72 vision SoC for automotive applications such as Front / surround-view camera. Qualification, OPNs and official sources are consolidated below for a fast project decision.