TI AUTOMOTIVE · PART DECISION PAGE

DS90UB962-Q1

Quad camera deserializer hub with one CSI-2 output

Terminates four independent remote-sensor FPD-Link III links and merges them into one CSI-2 output port. This suits aggregation into a single host camera interface, not the dual-output architecture of DS90UB960-Q1. Aggregate image traffic, forwarding timing and the host's virtual-channel handling must be matched together.

AutomotiveActiveExample package: VQFNP (RTD) · 64 pinVerified 2026-11-06

Open TI ordering page →

5-second verdict

AutomotiveAEC-Q100 Grade 2

Temperature−40°C to +105°C (TA)

Functional safetyFunctional Safety-Capable

LifecycleActive

In one sentence: Qualification is grounded in this TI product's documentation; no grade is inferred from temperature. An ordering table may show junction or variant-specific limits, which must be distinguished from ambient conditions. TI explicitly lists Functional Safety-Capable. This is a device-documentation category, not system ASIL certification; assess the exact function, assumptions and safety manual.

Key specifications

Receive links4 independent FPD-Link III inputs

CSI-2 output ports1; not two independent outputs

Output data lanes1 / 2 / 3 / 4 on the single CSI-2 port

CSI-2 per-lane rate400 / 800 / 1200 / 1500 / 1600 Mbps

Output interface versionsMIPI D-PHY v1.2 / CSI-2 v1.3

SynchronizationProgrammable internal frame-sync generator / GPIO

Control interfacesDual I2C ports; Fast-mode Plus up to 1 Mbps

Receive channel medium50 Ω coax or 100 Ω STP; adaptive receive equalization

Orderable variants (OPNs)

The GPN is for selection; the full OPN is for ordering. These examples were observed on the verification date, not live stock. Variants may differ in package, temperature, gain/threshold and, for PMICs, NVM/sequencing. Distinguish TA from TJ in the exact datasheet.

OPN	Package	Temperature	Note
DS90UB962WRTDRQ1	VQFNP (RTD) · 64 pin	-40 to +105°C (TI OPN listing; verify TA/TJ)	Verify exact OPN, temperature definition and revision; not a stock claim.
DS90UB962WRTDTQ1	VQFNP (RTD) · 64 pin	-40 to +105°C (TI OPN listing; verify TA/TJ)	Verify exact OPN, temperature definition and revision; not a stock claim.

DS90UB962WRTDRQ1-40 to +105°C (TI OPN listing; verify TA/TJ)

VQFNP (RTD) · 64 pinVerify exact OPN, temperature definition and revision; not a stock claim.

DS90UB962WRTDTQ1-40 to +105°C (TI OPN listing; verify TA/TJ)

VQFNP (RTD) · 64 pinVerify exact OPN, temperature definition and revision; not a stock claim.

Official ordering page: https://www.ti.com/product/DS90UB962-Q1

Typical applications

Four-camera aggregation into a single host CSI-2 interfaceSurround-view acquisition with frame synchronization and per-link control

FAQ

Do four receivers provide four CSI-2 output ports?

No. Four FPD-Link III inputs share one CSI-2 output port with 1, 2, 3 or 4 data lanes. If two independent CSI outputs are required, membership in the 96x family does not make DS90UB962 equivalent to DS90UB960.

Can every connected camera independently retain its maximum image rate?

The input count does not guarantee this. All streams traverse the same CSI output. Include pixel width, line/frame overhead, lane rate and forwarding mode in the bandwidth budget, and verify that the SoC can distinguish the mapped virtual channels.

How should I verify the DS90UB962-Q1 orderable?

The page lists 2 OPN examples from official material checked on 2026-11-06. Match package, function options and temperature definitions; obtain live price/stock from TI or authorized distributors.

Sources and verification

Related selection and design checks

All selection guides →What does TI Q1 mean →AEC-Q100 grades →Model Y TI BOM →

NuAxi is an independent semiconductor market-intelligence platform and is not affiliated with Texas Instruments. Information is for selection reference only and is not a design, certification or procurement guarantee; verify against TI's official datasheet, ordering page and terms.