NuAxi

TI AUTOMOTIVE · PART DECISION PAGE

TCAN1145-Q1

CAN FD transceiver with partial networking

SPI-configured selective wake can reduce active nodes under supported wake-frame/network conditions. SPI does not mean an integrated CAN controller; watchdog and advanced diagnostics of 1144/1146 must not be attributed to 1145.

AutomotiveActiveExample package: VSON (DMT) · 14 pinVerified 2026-11-06
Open TI ordering page →

5-second verdict

AutomotiveAEC-Q100 Grade 1
TemperatureSee OPN / datasheet; Grade stated separately
Functional safetyFunctional Safety-Capable
LifecycleActive
In one sentence: Qualification is grounded in this TI product's documentation; no grade is inferred from temperature. An ordering table may show junction or variant-specific limits, which must be distinguished from ambient conditions. TI explicitly lists Functional Safety-Capable. This is a device-documentation category, not system ASIL certification; assess the exact function, assumptions and safety manual.

Key specifications

CAN FD rateUp to 5 Mbps
VCC4.5–5.5 V
Configuration interfaceSPI; not CAN frame controller
Wake capabilityWUF-based selective wake / partial networking
Bus-fault protection±58 V
Package pins14

Orderable variants (OPNs)

The GPN is for selection; the full OPN is for ordering. These examples were observed on the verification date, not live stock. Variants may differ in package, temperature, gain/threshold and, for PMICs, NVM/sequencing. Distinguish TA from TJ in the exact datasheet.

OPNPackageTemperatureNote
TCAN1145DMTRQ1VSON (DMT) · 14 pin-40 to +150°C (TI OPN listing; verify TA/TJ)Verify exact OPN, temperature definition and revision; not a stock claim.
TCAN1145DRQ1SOIC (D) · 14 pin-40 to +150°C (TI OPN listing; verify TA/TJ)Verify exact OPN, temperature definition and revision; not a stock claim.
TCAN1145DYYRQ1SOT-23-THN (DYY) · 14 pin-40 to +150°C (TI OPN listing; verify TA/TJ)Verify exact OPN, temperature definition and revision; not a stock claim.
TCAN1145DMTRQ1-40 to +150°C (TI OPN listing; verify TA/TJ)
VSON (DMT) · 14 pinVerify exact OPN, temperature definition and revision; not a stock claim.
TCAN1145DRQ1-40 to +150°C (TI OPN listing; verify TA/TJ)
SOIC (D) · 14 pinVerify exact OPN, temperature definition and revision; not a stock claim.
TCAN1145DYYRQ1-40 to +150°C (TI OPN listing; verify TA/TJ)
SOT-23-THN (DYY) · 14 pinVerify exact OPN, temperature definition and revision; not a stock claim.

Official ordering page: https://www.ti.com/product/TCAN1145-Q1

Typical applications

Partial-networking low-power nodesSPI-configured CAN FD networks

FAQ

Does SPI remove the need for a CAN controller?

No. SPI configures the transceiver. CAN data-link control remains in the host or a separate controller.

Does TCAN1145 include the family's Q&A watchdog?

The reviewed family description assigns watchdog and advanced diagnostics to TCAN1144/1146, not TCAN1145. Selective wake is not watchdog supervision.

How should I verify the TCAN1145-Q1 orderable?

The page lists 3 OPN examples from official material checked on 2026-11-06. Match package, function options and temperature definitions; obtain live price/stock from TI or authorized distributors.

Sources and verification

Related selection and design checks

NuAxi is an independent semiconductor market-intelligence platform and is not affiliated with Texas Instruments. Information is for selection reference only and is not a design, certification or procurement guarantee; verify against TI's official datasheet, ordering page and terms.

TCAN1145-Q1: CAN FD transceiver with partial networking — AEC-Q100, OPNs, alternates | NuAxi