DDR6 RAM shrinks by 44% while delivering 4X DDR5's baseline bandwidth — JEDEC previews 12.8 GT/s modules with up to 1 terabyte of capacity per slot
What happened
JEDEC released a preview of the DDR6 specification (published 19 November 2026), confirming that next-generation memory modules will measure just 74mm in length, 44% shorter than DDR5's 133mm modules and only 6% longer than DDR5 SO-DIMMs. On performance, DDR6 will debut at 12.8 GT/s (DDR6-12800), more than double DDR5's baseline transfer rate (DDR5-4800 at 4,800 MT/s); baseline per-module bandwidth reaches 153.6 GB/s, a 4X uplift over DDR5's 38.4 GB/s baseline, while the uplift versus DDR5-9200 RDIMMs (maxing at 73.6 GB/s per module) is a little more than double. JEDEC anticipates DDR6 reaching DDR6-14400 and beyond, though this targets the server and enterprise market, and it remains to be seen which speed launches in the consumer market. The data bus width increases to 96 bits, a 50% boost over DDR5's 64 bits, with a new architecture of four 24-bit sub-channels; bank count is 2X DDR5's (64 vs 32); DDR6 will support 128Gb (16GB) dies, a 4X density leap over early DDR5 modules, enabling die stacking via Through-Silicon Vias (TSVs). Module capacity could rise to 128GB or 256GB and potentially scale RDIMMs to 1TB or more per slot. DDR6 has no official launch date; many believe 2029 is a realistic target for commercialization. The pin count has not been revealed, and form factors (potentially RDIMM, UDIMM, and CAMM like DDR5) are still being determined.
Impact and signal
Affected components and suppliers
Source and time
Source: Tom's Hardware · 11/19/2026 · View original source
Real-time pricing, supply signals and AI analysis for semiconductor traders